OUTER SHELL Half Framebag
These Half Framebags look good on most bikes because the sizes differ in small increments, allowing you to dial in your fit. We try to accommodate water bottles on the seat tube by tapering one end. The small version tapers down to two inches in the rear, which is great for smaller riders or bikes with compact geometry (i.e. sloping top tubes). All bags come with extra long velcro straps that can be trimmed or moved around to different slots. Also, all three sizes come in ten different colors!
Double-sided velcro set (short, long, narrow and wide straps)
Foam padded perimeter to prevent rattling
Full zip main comparment (drive side)
Internal pocket(s) inside main compartment (drive side)
Full zip external pocket (non-drive side)
PU coated Cordura main fabric (water resistant)
HANDMADE IN CALIFORNIA
Sizing and Dimensions
You can figure out what size is best by measuring your frame from inside the triangle. Here's how sizing works: match up your head tube measurement to the H2 dimensions below. Compare these to find out how far forward the bag will sit. From that point, measure your top tube length and match that up with the L1 dimensions below. All bags come with extra long velcro straps that can be trimmed or moved around to different slots, so don’t worry about the straps not reaching or running into cable stops. The width is 2.25 inches for all three sizes.
Small - 1.9L // Weight: 8 oz
H2 (head tube)
L1 (top tube)
Attach velcro straps tightly to frame. The longer straps can be unrolled on one end to get the right length.
To remove a velcro strap, unstick the velcro by inserting a flat object under the daisy chain webbing
To insert a velcro strap, slide it in with a flat object so you can pull it through without it sticking to the webbing